- 150 MHz Passive Oscilloscope Probe with accessory set
- Slide switch in the head selects attenuation of x1 (Bandwidth DC to 6MHz) or x10 (Bandwidth DC to 150MHz)
- Rise time: 2.3nS (x10), 58nS (x1)
- Designed and calibrated for use with instruments having an input impedance of 1 MΩ shunted by 20pF; however, it may be compensated for use with instruments having an input capacitance of 10 to 30pF.
- Includes Probe, Channel Identifier Clips, Sprung Hook, Ground Lead, Insulating Tip, IC Tip, Adjusting Tool, Measuring Tip, Sprung Earth Tip, BNC Adapter, and Probe Tip Cover
The HP-3150 is a passive high impedance oscilloscope probe designed and calibrated for use with instruments having an input impedance of 1 MΩ shunted by 20pF; however, it may be compensated for use with instruments having an input capacitance of 10 to 30pF. The cable length is about 4 feet. The probe incorporates a two position slide switch in the head which selects attenuation of x1 or x10:
Position X10:
- Attenuation Ratio: 10:1
- Bandwidth: DC to 150MHz
- Rise Time: 2.3nS
- Input Resistance: 10MΩ when used with oscilloscopes which have 1MΩ input.
- Input Capacitance: Approx. 13 pF
- Compensation Range: 10 to 30 pF
- Max. Input Voltage: 500V CAT II (DC + peak AC) derating with frequency
Position X1:
- Attenuation Ratio: 1:1
- Bandwidth: DC to 6MHz
- Rise Time: 58nS
- Input Resistance: 1MΩ (oscilloscope input resistance)
- Input Capacitance: 56 pF plus oscilloscope capacitance
- Max. Input Voltage: 150V CAT II (DC + peak AC)
Included Accessories:
- Channel Identifier Clips (2 Blue, 2 Red, 2 Green, and 2 Yellow)
- Sprung Hook
- Ground Lead
- Insulating Tip
- IC Tip
- Adjusting Tool
- Measuring Tip
- Sprung Earth Tip
- BNC Adapter
- Probe Tip Cover
